 |
"Anywhere" Cordless LED Light
closeout.com
Weiss (we-EZRFL1701) "Anywhere" Cordless LED LightFeatures:Includes belt pouch for instant access! 18 Super Bright 100,000 hour Flood light style LEDÃ?s. Ratcheting hinge for multiple angle settings. E-Z on/off - open/close. Up to 7 hour cordless use between charging. Rugged hook offers stationary positioning and easily stores in light housing. Compact design delivers brilliant illumination and is only 1/4 the size of other LED work lights!
Click here for more information... |
|
 |
"Inspector" 2 In 1 Electronic/UV Leak Detector
closeout.com
Weiss (we-MAS55200) "Inspector" 2 In 1 Electronic/UV Leak DetectorFeatures: Perform Electronic and UV Leak Detection all with one tool. Pin-point leaks as small as 1/10 oz (3 gr) per year. Six levels of sensitivity (15 levels of detection) with a tri-colored LED indicator. The ultra bright UV light is built into the end of the probe, allowing easy access into tight areas. Incorporating both electronic and UV technology into one unit insures that even the toughest leaks can be found.
Click here for more information... |
|
 |
"Little Gorilla" Tire Caddy
closeout.com
Weiss (we-LT930) "Little Gorilla" Tire CaddyFeatures: Light duty Truck/SUV/Van - 14"" to 19"" wheels. Lifts tire directly onto hub. Steel roller bearings for easy transport. Compact storage saves space.
Click here for more information... |
|
 |
"RigiFlex" Hose Clamp Pliers - Cable Operated
closeout.com
Weiss (we-MAY28630) "RigiFlex" Hose Clamp Pliers - Cable OperatedFeatures: Pre-set and pre-position cable and jaws for reaching the most difficult to get at hose clamps. Positionable, ""obedient"", flex cable can be bent into shape for reaching around objects. Ratcheting mechanism allows preseting jaw position as well as improved control over jaws duing hose clamp removal and installation operations.
Click here for more information... |
|
 |
"S" GearWrench - 4 Piece Fractional Set
closeout.com
Weiss (we-KD85399) "S" GearWrench - 4 Piece Fractional SetFeatures:Reversible levers on both ends to allow for direction changes from either side. Elimnates the problem of reaching around many obstructions. Two double reversing 5 degree ratchet action heads - Only requires 5 degrees to turn the fastener. Comes in a molded tray. Lifetime warranty. 4 Piece set includes: (3/8"" x 7/16""); (1/2"" x 9/16""); (5/8"" x 11/16""); (3/4"" x 7/8"")
Click here for more information... |
|
 |
"S" GearWrench - 5 Piece Metric
closeout.com
Weiss (we-KD85299) "S" GearWrench - 5 Piece MetricFeatures:Reversible levers on both ends to allow for direction changes from either side. Elimnates the problem of reaching around many obstructions. Two double reversing 5 degree ratchet action heads - Only requires 5 degrees to turn the fastener. Comes in a molded tray. Lifetime warranty. 5 Piece set includes: (10 x 12mm); (11 x 13mm); (14 x 16mm); (15 x 17mm); (19 x 22mm)
Click here for more information... |
|
 |
"TC" Torque Comparator
closeout.com
Weiss (we-PRETC3F175F) "TC" Torque ComparatorFeatures: ""TC"" torque comparator is calibrated on torque testers which are certified using text bars and class ""F"" weights traceable to NIST. Meets or exceeds GGG-W-686C and ANSI B107. 14M. Perfect for a facility where a quick check of a wrench is required before usage. Excellent for tool trucks to verify wrench accuracy and avoid unnecessary service. Highly accurate from 20% of full scale to full scale. 1/2"" male square drive, 1/2"" female square drive adaptor included. Large 175 lb.-ft. scale dial with increments every 5 lb.-ft for easy torque reading. Compact design allows for horizontal or vertical mounting. No power requirements.
Click here for more information... |
|
 |
"The Slugger" Heavy Duty Slide Hammer
closeout.com
Weiss (we-TA81000) "The Slugger" Heavy Duty Slide HammerFeatures: 10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue. Special hand-fit weight for ease of work. The most complete set available! 10 of the latest and most modern engineered body pulling and pushing attachments. Consists of 16 different parts. Dual hammer action for reverse or direct reconstruction blows. Quick assembly for applied hook-ups on fender edges, bumper ends, rocker panels, aligning doors and door edges, hoods and hood hinges, trunk and trunk hinges, headlights and many more applications. Rubberized hand-hold for good grip and safety. All parts easily stored on permanent board. Supplied with exclusive lock nut to keep attachments from rotating.
Click here for more information... |
|
 |
"The Slugger" Heavy Duty Slide Hammer with Carrying Case
closeout.com
Weiss (we-TA81100) "The Slugger" Heavy Duty Slide Hammer with Carrying CaseFeatures: 10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue. Special hand-fit weight for ease of work. The most complete set available! 10 of the latest and most modern engineered body pulling and pushing attachments. Consists of 16 different parts. Dual hammer action for reverse or direct reconstruction blows. Quick assembly for applied hook-ups on fender edges, bumper ends, rocker panels, aligning doors and door edges, hoods and hood hinges, trunk and trunk hinges, headlights and many more applications. Rubberized hand-hold for good grip and safety. All parts easily stored on permanent board. Supplied with exclusive lock nut to keep attachments from rotating. Includes a handy metal tool box which can be locked for security.
Click here for more information... |
|
 |
"The Strutter" MacPherson Strut Coil Spring Tool
closeout.com
Weiss (we-TA62900) "The Strutter" MacPherson Strut Coil Spring ToolFeatures: Every shop, no matter how small, can do work on the Mac Pherson Strut assembly found on virtually all modern domestic and imported vehicles. The S & G 62900 ""Strutter"" can be: Used with impact wrench or hand tool. Used ON or OFF the car! Sells for a fraction of other types. Each set contains complete instructions and a safety kit. The one piece cold headed bolts are made of chromiumolybdenum alloy steel. The nuts are Grade 5. Do not use on General Motors ""A"", ""C"", ""J"" or ""X"" Body cars. Not for use on any unusually large MacPherson Strut springs which have a coil outside diameter of over 6"" or a wire diameter larger than 5/8"".
Click here for more information... |
|
 |
"True Blue 93642" 2-Ton Hydraulic Service Jack
closeout.com
Weiss (we-HWW93642) "True Blue 93642" 2-Ton Hydraulic Service JackFeatures: Low 3.75"" pick-up height. High height of 20"". Removable one-piece handle. U-joint release mechanism for precise load control. In-line pump provides for the most efficient pumping operation. Cast iron lift arm for heavy duty loads. Automatic valve prevents overloading. Sealed hydraulic pump to protect from contamination. Full swivel rear casters for easy positioning. Flanged side plates increase strength. Made in USA.
Click here for more information... |
|
 |
.030" Flux Core Mig Welding Wire - 10 Lb. 8" Spool
closeout.com
Weiss (we-MLL113794) .030" Flux Core Mig Welding Wire - 10 Lb. 8" SpoolFeatures: Used for general mig welding on mild steel where gas sheilding is inconvenient (such as outdoors) or unavailable. AWS E71T-GS
Click here for more information... |
|
 |
.035" Flux Core Mig Welding Wire - 10 Lb. 8" Spool
closeout.com
Weiss (we-MLL113797) .035" Flux Core Mig Welding Wire - 10 Lb. 8" SpoolFeatures: Used for general mig welding on mild steel where gas sheilding is inconvenient (such as outdoors) or unavailable. AWS E71T-GS
Click here for more information... |
|
 |
0-1" Digit Counter Outside Micrometer
closeout.com
Weiss (we-FOW72-224-001) 0-1" Digit Counter Outside MicrometerFeatures:Featuring clear, easy to read numbers on a digital counter, Fowler''s digit counter micrometers are an economical, fast and easy-to-use addition to the machinist''s toolchest, the shop floor or in the QC area. Hammertone grey baked enamel frame with heat insulated frames. Microfine graduations on satin chrome. Anvil and spindle hardened and precision ground with microlap finish on carbide tipped measuring faces. Spindle thread is hardened, ground and lapped. Diameter of measuring faces: .256"" Ratchet stop thimble on all models. Quick, easy zero adjustment on sleeve. Positive locking nut on spindle. Accuracy: .00016"" Parallelism: .00005"" for 0-1"" Flatness: .00003"" 0-1"" Range .0001"" Graduation Meets or exceeds Federal accuracy specs. Includes wrench and fitted case.
Click here for more information... |
|
 |
0-3" Digit Counter Outside Micrometer Set with Standards and Case
closeout.com
Weiss (we-FOW72-224-103) 0-3" Digit Counter Outside Micrometer Set with Standards and CaseFeatures:Featuring clear, easy to read numbers on a digital counter, Fowler''s digit counter micrometers are an economical, fast and easy-to-use addition to the machinist''s toolchest, the shop floor or in the QC area. Hammertone grey baked enamel frame with heat insulated frames. Microfine graduations on satin chrome. Anvil and spindle hardened and precision ground with microlap finish on carbide tipped measuring faces. Spindle thread is hardened, ground and lapped. Diameter of measuring faces: .256"" Ratchet stop thimble on all models. Quick, easy zero adjustment on sleeve. Positive locking nut on spindle. Accuracy: .00016"" Parallelism: .00005"" for 0-1"" Flatness: .00003"" .0001"" Graduation 0-3"" Range with standards and case. Meets or exceeds Federal accuracy specs.
Click here for more information... |
|
 |
0-6" Digit Counter Depth Micrometer
closeout.com
Weiss (we-FOW72-225-226) 0-6" Digit Counter Depth MicrometerFeatures: Range: 0-6"" Easy to read Digit Counter Graduation: .001"" 6 Rods Satin chrome finish Ratchet thimble Locking clamp Rod diameter: .176"" Includes wrench and fitted case
Click here for more information... |
|
 |
1 Gallon Brake Bleeder Tank
closeout.com
Weiss (we-CAL855) 1 Gallon Brake Bleeder TankFeatures: Lightweight, plastic, easy to use. Portable tank fills and bleeds both standard and power brakes in a single operation. Tank is easily pressurized with just a few strokes of the built-in hand pump eliminating the need for the compressor. One (1) gallon capacity. 9.66-ft. of hose included. Features quick disconnect coupler, shut off valve and pressure gauge.
Click here for more information... |
|
 |
1 Gallon Steel Plunger Can
closeout.com
Weiss (we-JUS10308) 1 Gallon Steel Plunger CanFeatures: 1 gallon Perforated pan screen serves as a flame arrester. Top rim has molded edge protectors for smooth, trouble-free moistening. 24-gauge steel constuction. Finished in a tough, chemical resistant powder paint. Steel dasher assembly, brass plunger assembly. 7.25"" outer diameter x 11"" height, 5"" dasher diameter. Factory Manual (FM) tested and approved. Backed by industry exclusive Ten-Year Limited Warranty
Click here for more information... |
|
 |
1 Ton 10'' Lift Hand Chain Hoist
closeout.com
Weiss (we-JET101704) 1 Ton 10'' Lift Hand Chain HoistFeatures:All purpose hand chain hoist features impact resistant, lightweight steel construction with durable powder coat finish. Needle bearing supported load sheave for long life and low wear. Triple spur gears provide high efficiency ratio. Low headroom for easy installation even in confined areas. Compact and portable with excellent load spotting capabilities. Induction hardened, corrosion resistant grade 80 load chain. Hand chain cover designed for smooth operation and prevents side pull jamming. Completely enclosed Weston type automatic brake system with two ratchet pawls for positive load control. Drop forged safety hooks with durable latches swivel 360â?? for easy rigging. Proof tested and certified. Complies with OSHA, ANSI/ASME B30.16 and HST-2M standards.
Click here for more information... |
|
 |
1" Air Impact Wrench with 6" Extended Anvil- Ergonomic
closeout.com
Weiss (we-CP7775-6) 1" Air Impact Wrench with 6" Extended Anvil- ErgonomicFeatures:Chicago Pneumatic is pleased to introduce a new addition to the 1"" impact wrench family. Long known for durability and performance, we have now added a tool which gives the durability you expect from Chicago Pneumatic with less weight. With directed exhaust to keep dust and materials away from the operator, 1,550 ft-lbs of torque, over 5,000 rpm of free speed, and ergonomically designed handles and trigger, this tool has all you need for heavy duty truck and equipment repair. Features included will make it the tool of choice for the most demanding truck tire service applications. Great power, durability, ergonomics, and speed. The leader in 1"" impacts adds to the line: 6"" Extended anvil for tire work. 1,550 ft-lbs of torque: Power to make this the most powerful 1"" in its weight class 5,000 rpm: Speed to get the job done fast and efficiently Directed exhaust: Directs exhaust air away from operator and work area Overmold Side Handle Grip: Comfort and control in any condition Four position power control: Power control for all types of applications
Click here for more information... |
|
 |
1" Drive Heavy Duty Impact Wrench
closeout.com
Weiss (we-IR295A) 1" Drive Heavy Duty Impact WrenchFeatures:A new, improved 1"" drive tool perfect for truck and heavy equipment maintenance, the 295A offers power and convenience at an affordable price. Handle exhaust direct air away from the work Top-mounted dead handle 3-positiion power regulator provides torque management
Click here for more information... |
|
 |
1" Drive Heavy-Duty Impact Wrench with 6 " Extended Anvil
closeout.com
Weiss (we-IR285B-6) 1" Drive Heavy-Duty Impact Wrench with 6 " Extended AnvilFeatures:If you want exceptional power, durability, and ease-of-use from an impact wrench, the Ingersoll-Rand 285B-6 delivers. The impact''s robust, six-vane motor cranks out an impressive 1,450 ft.-lb. of maximum torque with a 5,000 RPM maximum free speed. Not only will the 285B-6 easily handle whatever task you put it to, the impact will also help you maneuver more comfortably thanks to its professional touch trigger, swept-back side handle for superior balance, and ""angled-down"" exhaust. If you have a big job, this is the tool for you. Professional Touch Trigger Ergonomic swept-back side handle provides convenience and maneuverability Robust 6-vane air motor delivers 1,450 ft.-lb. maximum torque Durable 6"" extended anvil Adjustable 3-position power regulator provides ultimate power control Specifications Performance Rating: Heavy-Duty Extended Anvil Drive: 1 in. Max. Torque: 1,450 ft.-lbs. (1,966Nm) Free Speed: 5,000 RPM Overall Length: 20.1 in. / 511 mm Weight: 27.3 lbs. (12.39 kg.) Sound Pressure/Power: 107dbA / 120dbA Length: 20.1 (511mm) Avg. Air Consumption: 10 CFM (283 L/min.) Avg. Air Consumption@Load: 37 CFM (1047 L/min.) Air Inlet (NPTF): 1/2 in. Minimum Hose Size: 1/2 in. (13 mm)
Click here for more information... |
|
 |
1" Drive Metric Truck Service Impact Socket Set - 7 Pc.
closeout.com
Weiss (we-SUN5697M) 1" Drive Metric Truck Service Impact Socket Set - 7 Pc.Features: No-Slip design in forged cro-moly. Lifetime manufacturer''s warranty (excludes thin wall sockets). 1"" drive sockets in a blow molded case. Set includes: Deep - 27, 33, 35, 36, 41mm Square - 17, 21mm
Click here for more information... |
|
 |
1" Drive Split Beam Torque Wrench
closeout.com
Weiss (we-PREC5D600F) 1" Drive Split Beam Torque WrenchFeatures:The C5D600F has the unique feature of having a removeable ratchet head that that allows the wrench to be broken down and stored in a case that will fit in most truck storage areas with ease. Split-Beam Click Wrenches overcome many of the problems associated with micrometer-style click wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to ""work in"" a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip force since the adjustment mechanism is not under load. Extremely Accurate-Accurate within 4% of reading from 20% of full scale to full scale. Guaranteed against defect in workmanship and materials for 1 year from the date of delivery providing that they have been used according to instructions. Setting torque on adjustable wrenches is fast and easy because there is no spring tension on the adjustment knob. Torque setting locks on adjustable wrenches for repetitive applications. The wrench length is designed to provide the leverage required for maximum torque applications. The length also provides the needed reach for those-hard-to-get-at places. Plastic molded storage case, calibration certificate, and instructions included. Square Drive: 1"" drive, detacheable ratchet Range: 200-600 lb. ft. Graduations: 10 lb. ft. Overall Length: 48-29/64"" Effective Length: 44-31/32"" Width: 2-3/8"" Head Height (without square): 1-1/4"" Weight: 11.76 lbs. (w/plastic case): 14.18 lbs. Finish: Nickel / Chrome Square Drive Service Kit: R44AR-RK Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14M
Click here for more information... |
|
 |
1" Drive Super Duty Impact Wrench with 6" Ext. Anvil - Ergo Grip Design
closeout.com
Weiss (we-IR2190TI-6) 1" Drive Super Duty Impact Wrench with 6" Ext. Anvil - Ergo Grip DesignFeatures: Extended, robust bushing is at least 2 times more durable for extended life. Lighter weight in front of the gun .33 lbs lighter vs. IR2080-6, .58 lbs lighter vs. IR2080 Titanium hammer case weighs less and provides greater durability Coarse threading reduces stripping 7-Vane motor delivers 1,600 ft-lbs max torque Ergonomic ""Chainsaw"" handle and grip for better control and comfort Net weight: 15.5 lbs Weighs up to 14.7 lbs less than CP797-6 6,800 rpm 21.5"" long Power settings: 3 forward, 1 reverse Made in USA
Click here for more information... |
|